COOLEY'S PRESSURE WELDED BASKET
A Common sense design!
Baskets, when stacked, rest all along the
top perimeter, providing overall sidewall structural support. They interlock
with each other, preventing the sidewall from distorting in or out, and feature
complete perimeter support just like the old
style mig-welded baskets, but at a substantial savings in labor. Less
expensive, but well proven pressure welding is used, providing for a competitively
priced product. In most situations, baskets will stack with the competition.
Available in SS304, SS330, Inconel 600, and HR120.
Figure 1: The ears will locate between the
radius rods and the runner or corss rods, essentially interlocking the
sidewalls in one position. Under heat, the path of expansion for this basket
is upward not outward, therefore further reducing sidewall distortion.
Figure 1: Interlocking width
Figure 2: A close up view of the radius rods resting
along on top of the nubs of the basket below. This provides greater over
and under support than conventional designs.
#runners + #crosses + #runners + #crosses = # of points
of contact.
Figure 2: Points
of contact
We weave wire cloth!
The standard meshes are 2m.120 & 4m.080. Space cloth is available.
Liners, screens, or rolls.
Specialty designed mesh fixturing is available. Just send us your part!
No order too big or too small! Inquire about setting up a blanket order to
control your pricing!
All content provided in these pages is copyright
Cooley Wire Products
and may not be used or reproduced without expressed
written consent of Cooley Wire Products Inc.